Description
PlastoBlend is a superplasticizer that is a combination of Polycarboxylic Ether (PCE) and
special additives.

• For low to medium-grade slump concrete.
• Provide cohesiveness in concrete and good retention.
• Compatible with OPC, PPC, Fly ash, GGBS & Micro silica concrete mix.
• Reduce water requirement up to a certain extent 
• Provides longtime workability hours which does not affect the final setting time of concrete.

Description
HiBlend is a superplasticizer specifically designed to offer superior performance and
durability compared to other superplasticizers in the market. The unique formulation of
HiBlend is based on advanced chemistry and engineering principles, resulting in a highperformance concrete admixture that can withstand harsh environmental conditions
and extreme loads.

• For medium to higher grade slump concrete.
• Provides good workability in concrete by dispersing with water up to a certain extent which helps to place concrete even in congested reinforced areas with an excellent finished surface.
• Compatible with OPC, PPC, Fly ash, GGBS & Micro silica concrete mix.
• Provide a high-range water reduction, which helps to make medium & high strength concrete grades due to a certain amount of water reduction in the concrete mix resulting in less permeable and durable concrete.
• Dosage sensitivity is less – at a high dose no impact on the final setting time.

Description
FloBlend, a superplasticizer, is utilized for producing self-compacting concrete (SCC)
and is particularly useful in structures with dense reinforcement, such as floors, slabs,
foundations, walls, beams, beam & column junctions, etc. where the use of a vibrator is
not possible. By eliminating the need for vibration, SCC can help save time, reduce
labour costs, and improve the overall quality of the finished product.

• For High Performance, self-compacting, self-leveling, free flow, and high flow concrete.
• Provides flow ability in concrete by dispersing with water up to a certain extent which helps to place concrete even in congested reinforced areas with an excellent finished surface. Compatible with OPC, PPC, Fly ash, GGBS & Micro silica concrete mix.
• Provide a very high range water reduction, which helps to make high-strength concrete which results in less permeable and durable concrete structures.
• Reduction in shrinkage & creep.
• Provides Longer workability hours which do not affect the final setting time of concrete.

Description
CastoBlend is an economical as well as versatile polymer-based admixture that offers
high-performance characteristics, making it ideal for precast yard production of RCC
Hume Pipes, Sleepers, Concrete Poles, pavement blocks, and fly ash bricks.

• As a spray applied membrane to restrict the evaporation loss of concrete internal water for effective curing.
• Suitable for all general concreting applications like columns, slabs, slab decks, high-rise buildings, roads, and bridgeworks.

• For Air Entraining Concrete.
• Highly Concentrated air is used for air-entraining Concrete.
• Increased frost resistance due to internal air locking technology.
• Reducing the risk of segregation & increase concrete cohesion.

• As a spray applied membrane to restrict the evaporation loss of concrete internal water for effective curing.
• Suitable for all general concreting applications like columns, slabs, slab decks, high-rise buildings, roads, and bridgeworks.

• Specially prepared to facilitate the concrete pumping system in a cost-effective manner instead of Cement slurry during the pumping of concrete.
• Functioning as a concrete pumping aid by generating thin lubricating film inside the pump pipelines and reducing friction which enables the smooth placing of concrete.

• SBR-based multipurpose polymer for waterproofing and repair.
• It is a high-quality synthetic rubber emulsion that when added to cement slurry, cement mortar, or concrete provides good adhesion and water resistance that substantially increases the quality of cement slurry, cement mortar, and cement

Description
FloBlend Plus is a superplasticizer that is specifically designed for producing selfcompacting concrete in dense reinforcement situations. It provides steady workability,
high retention, and is suitable for high-performance structures.

• FloBlend Plus is a superplasticizer that is based on a unique carboxylate ether
  polymer and is specifically designed for water dispersion.
• This product is perfect for producing concrete that requires both steady
  workability and high retention, where the use of a vibrator is not possible due to
  dense reinforcement

Description
CuroBlend is a liquid curing agent designed to prevent early surface water loss from
newly poured concrete. It is readily available and easy to apply. The composition of
CuroBlend includes a microcrystalline paraffin wax emulsion, which is effective at
reflecting sun rays and dissipating surface heat. This ensures that the concrete does not
dry out too quickly, which can cause shrinkage, cracking, and reduced strength.

• It is applied to the surface of freshly laid concrete after the surface water has
  evaporated.
• Once applied, it creates a thin film barrier over the surface of the concrete, which
  helps to retain moisture and prevent the surface from drying out too quickly.

Description
SilicaMyx is a specially formulated material that is commonly used in construction for
creating high-strength concrete. It is typically added to the concrete mix design to
improve its compressive strength and durability

•  SilicaMyx is a high-performance material that is commonly used in the
  construction industry for creating high-grade concrete with compressive
  strengths of M-50 and above.
• In concrete mixes, SilicaMyx acts as a partial replacement for cement making the
  mix more economical.

Description
AcquaPruf Latex is a high-performance solution that is specifically designed for
waterproofing and repairs in construction applications. It is commonly used to address
spalled concrete in areas such as floors, slabs, columns, beams, and terraces. Spalled
concrete refers to concrete surfaces that have cracks due to environmental factors or
excessive wear and tear which can be prevented by applying AcquaPruf Latex.

• One of its key benefits is its ability to prevent cracking by enhancing flexural
  strength. When AcquaPruf Latex is applied to concrete surfaces, it forms a highly
  adhesive and flexible material that can withstand environmental factors without
  cracking or chipping. This helps to extend the life of concrete surfaces and
  prevent costly repairs.
• In addition to preventing cracking, AcquaPruf Latex also increases the hardness
  of concrete surfaces, which helps to prevent dust generation.

Description
PumpEase is an effective and versatile powder additive that enhances the pumpability
of challenging concrete blends while also protecting pumping equipment from wear
and tear. Its use can result in cost savings, increased efficiency, and improved concrete
quality

• PumpEase forms a thin lubrication film on the walls of the concrete pump’s
  pipeline and hoses, reducing the friction between the concrete and the
  equipment. This helps to enhance the flow properties of the concrete, making it
  easier to pump, while also reducing the wear and tear on the equipment.
•  PumpEase is a cost-effective alternative to cement slurry, which is commonly
  used to enhance the pumpability of concrete. Unlike cement slurry, PumpEase
  does not require the use of additional water or cement, which can add to the
  overall cost of the concrete mix

Description
TiloBond PRO is a type of tile adhesive that is designed for use on both floors and walls.
It is made with a cementitious base that has been modified with polymers, giving it
enhanced properties such as improved adhesion and flexibility

• TiloBond PRO is a polymer modified cementitious tile adhesive that is primarily
  used for bonding ceramic tiles on both floors and walls.
• The adhesive is also suitable for bonding vitrified tiles up to 4 sqft on the floor

Description
TiloJoint PRO is a high-quality tile grout designed for filling tile joints up to 5 mm wide.
It is a cement-based, single-component, polymer-modified grout that offers excellent
performance and durability.

• TiloJoint PRO comes pre-mixed and requires only the addition of water,
  simplifying the process of working with and applying it.
•  TiloJoint PRO is stainless, meaning that it does not stain or discolour over time,
  ensuring a long-lasting and aesthetically pleasing finish

Description
BlockBond PRO is a high-quality block joining mortar that is designed for fixing a
variety of building blocks, such as AAC blocks, concrete blocks, and fly ash bricks. It is a
ready-to-use, grey cement-based mortar that only requires the addition of water,
making it easy and quick to apply without any need for additional mixing.

• It is incredibly easy to use, as it comes ready-to-use and only requires the
  addition of water. This eliminates the need for any complicated mixing
  processes, making it quick and efficient to apply.
• Another significant advantage of this mortar is its thinner jointing material,
  which offers very high tensile adhesion strength, significantly improving the
  overall masonry strength.